Part 5: Programming in Ubuntu in Java

Draw EAN13 in Java Part 5: Programming in Ubuntu

It is often useful to have an ordering strategy that helps you work with the model. I usually try to keep the biggest parts, the parts that everything else is mated to, or the part that is treated as ground, as the first part(s) in the assembly. I put the fasteners and other cosmetic or BOM-driving parts at the end of the tree, usually in a descriptive folder. n

<link rel= stylesheet rev= stylesheet href= css/ocprint.css type= text/css media= screen charset= utf-8 />

The gate capacitance is an importance measure of the transconductance and the current drive attainable by a MOSFET. For MOSFETs scaled to small dimensions, the gate capacitance is no longer simply the gate oxide capacitance, Co, = CO/tox, but can best be described by an equivalent electrical thickness, teq = 60/Cinv, where Ci, is the gate capacitance at inversion. Figure 3.36 shows the calculated electrical equivalent oxide thickness (teq) versus physical oxide thickness (tox) curves for several combinations of substrate dopings and gate polysilicon dopings.8 2 The calculation compares the classic [Maxwell-Boltzmann distribution (MB) and Fermi-Dirac distribution (FD)] assumptions and the more accurate quantummechanical (QM) description. For thin physical oxide thickness, the discrepancy between physical oxide thickness and the electrical thickness is significant. The gate capacitance is degraded by two effects: 1. Inversion-layer broadening due to quantum confinement of the 2D electron

In an ammonia-based solution, the solution pH can vary between 7 (for an extremely diluted NH3 solution) and 11.5 (for an NH3 concentration of 1.2 M).36 The equilibrium reactions suggest that, in an ammonia solution, a Zn2+ ion in 2+ the solution will stay in the form of Zn(OH)2 along with Zn ( NH 3 )4 , whereas 2+ a Cd2+ ion in an ammonia solution is predominantly Cd ( NH 3 )4 . Nakada et al.37 effectively used CBD ZnS(O,OH) on a CIGS absorber to produce high-ef ciency solar cells. Three consecutive depositions were required in an ultrasonic environment to obtain device-quality 100-nm layers of CBD ZnS (O,OH). The chemical bath consisted of ZnSO4, ammonia, and thiourea. X-ray photoemission spectroscopy (XPS) analysis showed that a large amount of oxygen was included in the CBD ZnS lms in the form of Zn(OH)2 and ZnO. Single-layer CBD ZnS(O,OH) was later developed by Bhattacharya et al.,38 producing an 18.5%-ef cient CIGS-based device (Fig. 7.1). The deposition bath was based on ZnSO4, ammonia, and thiourea dissolved in a mixture of water and methanol solvent. The CBD ZnS(O,OH) was

The user who searches the GC in Forest B for a resource in Forest A can locate the requested resources and obtain direct access to the resource because of a one-way trust. As you are determining how many forests are required, keep the users needs in mind and not those of the administrators. Do not create multiple forests to solve administrative problems because this setup could possibly distort the users view of the forests. In certain cases, however, such as where having a consistent view is not important for the users, this type of setup is tolerable. Each forest that you create should have an associated forest change control policy as part of your forest-plan document. You use this policy to guide changes that have forestwide effects. You do not need to determine the individual processes before continuing, but understanding their ownership is important. The policy should include information about each of the shared elements in a forest. Monitoring or setting up a schema change policy is also important. This policy would include the team names that control the schema administration, the total number of members of the group, and the guidelines for schema changes. You should also devise a con guration change policy that consists of the same policies as the schema policy, adding guidelines for creating or changing domains for the forest and modifying the topology.

HelpVisible (Public Instance Property)

1 Beyond global and for update, cursors have several additional options that tweak their capability to manage or update data, such as static, keyset, dynamic, and optimistic. I m not even going to waste the space explaining these other options. The BestPractice is to strategically limit cursors and rely instead on set-based solutions.

Now, click Settings. As shown in Figure 12-61, this dialog enables you to choose which pictures to use in your screensaver, along with various other related options. You can click Preview in the Screen Saver Settings dialog to see how your new screensaver looks.

Instant 3D enables you to edit 2D sketches and solid geometry. You can also edit some additional feature types using Instant 3D such as offset reference planes. It can neither create nor edit surface geometry or 3D sketches in some situations. To edit solid geometry, click on a face, and an arrow appears. Drag the arrow, and SolidWorks automatically changes either the sketch or the feature end condition used to create that face. If a dimensioned sketch was used to create that face, SolidWorks will not allow you to use the Instant 3D arrow to move or resize the face. An option exists that enables Instant 3D changes to override sketch dimensions at Tools Sketch Settings Override Dims On Drag.